Cleanroom PVC Floor

Basic material: 1 Material: Polyvinyl chloride (PVC) homogeneous transparent structure 2. Thickness: ≥ 2.0mm, wear-resistant layer thickness ≥ 0.5mm 3. Width: ≥ 2m roll material

Clean and antibacterial performance: 1 Antibacterial rate: The antibacterial rate against Escherichia coli and Staphylococcus aureus is ≥ 99% Seamless welding: The strength of the weld seam is equal to or greater than the strength of the base material, there are no obvious gaps after welding, and the surface is smooth Easy to clean: The surface is smooth and pore free, and can withstand disinfectants such as alcohol and quaternary ammonium salts for wiping

Anti static performance: (optional as needed) 1 Surface resistance value: 10 ⁶ -10 ⁹ Ω 2 System resistance value: 10 ⁶ -10 ¹⁰ Ω 3. Anti static performance endurance period: ≥ 5 years

Physical and mechanical properties: 1 Wear resistance: Taber wear value ≤ 50mg/1000 revolutions. 2. Scratch resistance: ≥ Grade 4 (GB/T 3960-2016). 3. Impact resistance: 1kg heavy hammer impact at a height of 1m, without cracks or dents. 4 Fire rating: B1 level (fire-resistant material)

Chemical corrosion resistance: can withstand immersion in the following chemicals for 72 hours without discoloration or bubbling: 1 5% hydrochloric acid/sodium hydroxide 2 75% medical alcohol 3 Food grade dishwashing detergent

Environmental performance: 1 VOC content: ≤ 100 μ g/m ³ 2. No formaldehyde, no heavy metals (lead, cadmium, etc.) 3 Compliant with FloorScore/CE environmental certification

Construction requirements: 1 Grassroots requirements: Cement floor flatness ≤ 2mm/2m, moisture content ≤ 8% 2 Construction process: Hot melt seamless welding, with a weld width of 3-5mm. Acceptance criteria: no bubbles or warping on the surface, and the weld is flat and firm